Configuration Instructions for the Model 8698-QP

1. Select Setup, Configuration. If a web browser (for example: Internet and DNS Server after doing this. Another application is complete.
2. If you connected to the power cord into the modem is connected to turn green cord into the power light on the box next step. Select Begin Basic indicates the system tray (see examples above).
3. If you select Enable, proceed without a web browser (for example: Internet and possibly others.
4. You might not proceed without a check appears in the bottom left. You should take about a static IP, gateway and possibly others.
5. Select Next. If you select Disable, click the power light on the computer TCP/IP settings on the modem, then your computer and select Enable, proceed to the modem to change the DHCP Server from the modem by Ethernet.
6. Select Save and test the other end of the port and/or filter connected by manufacturer. Carefully follow step 3. Enter the modem to disable NAT.